Which of the following architectures is also known as "Five Principles of Peaceful Co-existence"?

Consider the following statements and choose the correct option:
Statement 1: The magnitude of earth fault current for a given fault position within a winding depends upon the method of neutral grounding.
Statement 2: Earth fault protection for an electric motor is provided by means of instantaneous overcurrent relay.

The magnitude of earth fault current for a given fault position within a winding demands upon the winding connections and method of neutral grounding.
Earth fault protection for an electric motor is provide by instantaneous relay having a setting of approximately 30% of motor rated current in the residual circuits of two CTs and with ground wire.

An RC series circuit with R = 150 Ω and C = 2 μF is excited by a DC source of 15 V by closing the switch at t = 0 with an initially uncharged capacitor. The initial and final voltages across the capacitor respectively are

For t = 0 in RC circuit,
After t = 0+ condition, capacitor is behave as short circuit.
Voltage across the it 0.
At final time,
Capacitor is behave as open circuit, voltage across the capacitor at final time is equal to 15 V.

Capacitor opposes the change of voltage.

A given solar cell has the following specifications:
Open-circuit voltage, Voc: 0.7 V
Short-circuit current, Isc: 3.5 A
Short-circuit current, Isc: 3.5 A
Short-circuit current, Isc: 3.5 A
If the solar cell operates at maximum power point, calculate the efficiency.

Equation is given by:
Efficiency = (F.F*Voc*Isc)/Pin
= (0.6*3.5*0.7)/10
= 0.14702
% efficiency = 14.7 %

મારુતારુંનો ઝગડો હજી ખતમ થયો નથી, ચારપાંચ વર્ષ થઇ ગયા અને રાતદિવસ સાથે ઉઠવા-બેસવાનું તો ચાલુ જ છે. ઉપરોક્ત વાક્યમાં ક્યા ક્યા વ્યાકરણીય સમાસનો ઉપયોગ કરાયો છે?

The frequency of the emf in the stator of a 4-pole induction motor is 50 Hz, and that in the rotor is 2 Hz. What is the slip and at what speed is the motor running?

Rotor frequency, f_r = s*f_s
s = 2/50
s = 0.04

Ns = 120f/P
Ns = 1500 rpm
s = (Ns - Nr)/Ns
Nr = Ns(1 - s)
Nr = 1500*(1 - 0.04)
Nr = 1440 rpm